Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gear change will help get that performance and economy back!

If you've fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting" - This is because the larger tires reduce your engine's RPMs below the optimal power band.

Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle's drivetrain. This is especially important for today's vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories.

It's a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4x4. This is a mod for anyone with larger tires, increased weight, or for increased performance on stock vehicles for towing or increased acceleration.

2016 & Newer 200 Series and LX570 equipped with an 8 speed Automatic Transmission will also require an older type Dropout Housing USEDOTLC and Pinion Flange YOKT60060, and the appropriate offset front carrier or locker NC-T9R-COM or RD151

We realize the difficulty for the average consumer or install shop to compile the list of parts and prices required when doing a gear change. To make it easier for everyone the experts at Nitro are introducing an industry first- “Gear Packages" for many popular 4x4 Fits.

One part number. One price. One click away.

Toyota Tundra 07-21 - Nitro Front & Rear Gear Package Kit

From $1,617.00

Quantity

Toyota Tundra 4x4 with 4.6L or 4.7L V8 2007-2021

Land Cruiser 200 Series with 4.6L petrol V8, 5.7L petrol v8, 4.0L petrol V6, 4.5L Diesel 2008-2021

Lexus LX570 2008-2021

*All Nitro Gear & Axle brand products are warrantied to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping or general inconvenience.

This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. Warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty.

Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered defect, it is installer responsibility to address these at time of install. Customer is responsible for shipping charges if warranty is granted. Warranty is for the original purchaser/user, is not transferable. Warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits - Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft / joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by failure of other parts are not warrantable, for example broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles - Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.
Tech Note:

*2016 & Newer 200 Series and LX570 equipped with an 8 speed Automatic Transmission will also require an older type Dropout Housing USEDOTLC and Pinion Flange YOKT60060, and the appropriate offset front carrier or locker NC-T9R-COM or RD151.

Front Diff:	Toyota 9" Clamshell
Rear Diff:	Toyota 9.5"
Gear Ratio	4.30, 4.88
Manufacturer:	Nitro Gear & Axle
Warranty:	2 Years

Toyota Tundra 07-21 - Nitro Front & Rear Gear Package Kit

FITMENT:

INTERCHANGE:

SPECIFICATIONS:

INSTALLATION:

WARRANTY:

ADDITIONAL INFORMATION: